HDMI Receiver
/ Transmitter > Receiver

Part Number:EP9353


EP9353 is a low cost high performance 2-port HDMI receiver which is compliant with HDMI 1.3b and supports HD Audio and Video in Deep Color up to 1080p. The chip integrates 2-port Equalizer Switch, HDMI core and HDCP engine in a single chip.


• On-chip 2-port HDMI receiver switch with Equalizer
• On-chip HDMI Receiver core which is compliant with HDMI 1.3b specification
• On-chip HDCP Engine which supports Repeater and is compliant with HDCP 1.2 specification
• Supports 36-bit deep color mode up to 1080p
• On-chip Audio Decoder which support 8-channel IIS and S/PDIF audio outputs
• Support Standard Audio, DSD Audio, HD (HBR) Audio and DST Audio
• Support audio soft mute
• Support SPDIF Channel Status extraction
• On-chip YCC422 to YCC444 conversion and YCC444 to YCC422 conversion
• On-chip YCC to RGB and RGB to YCC conversion in ITU-R BT.601 and 709 color space
• Support 30-bit RGB or 30-bit YCbCr 4:4:4 or 20-bit YCbCr 4:2:2 digital video output
• Support Bit Sequence Reverse and Port Swapping in video output ports to ease PCB layout
• Support Separate Sync and Embedded Sync output
• Support DDR in digital video outputs
• Register-programmable via slave IIC interface
• Flexible interrupt registers with interrupt pin
• Link On and Valid DE Detection
• Controllable tri-state for output ports
• Low stand-by current (< 1mA) at power down mode
• 128-pin LQFP package (Pb-free)