HDMI Repeater > Switcher
EP9461E is a 6GHz HDMI 2.0 4-IN 1-OUT Switcher with integrated Equalizer and Jitter Clean Circuit. The chip uses Re-Sample and Re-Drive architecture which re-samples data at the receiver side and re-drive data at the transmitter side. This architecture will not pass through noise from inputs to output and hence provides reliable transmission. Besides, the Jitter Clean Circuit provides the jitter-free output for extending the Cable Length. The chip also supports 4 ports of on-chip EDID RAM and programmable passive/active DDC switches to lower down system cost.
The chip is also integrated with an e-Flash MCU to make user’s applications very easy.
•Supports 4 HDMI input ports with integrated Equalizer
•Supports 1 HDMI output port with Jitter Clean Function
•Compliant to HDMI 1.4 and HDMI 2.0 specification
•Support wide Frequency Range: 25MHz - 600 MHz (VGA/480p - 4K2K60)
•Support 4 ports on-chip EDID RAM
•Support on-chip programmable passive/active DDC switches
•Register-programmable via slave IIC interface
•On chip e-Flash MCU
•Low stand-by current at power down mode
•128-pin LQFP (E-PAD) package