DP/ eDP > LVDS Bridge

Part Number:EP164S

Overview

EP164S is a 4-lane DP/eDP to 4-port LVDS bridge. The chip receive video stream from DP/eDP RX port and outputs it to LVDS TX port. The chip is compliant with DP 1.2 specification. The chip supports display resolution up to 600 M pixels/second. The on-chip LVDS transmitter is capable of transmitting data at 165 M pixels/second each port. The LVDS outputs can be configured as 2-port outputs or 4-port output. Data output sequence can also be configured as Sequential mode or Left-Right mode.


Feature

•4-Lane DP/eDP 1.2 Receiver capable of supporting 540 Mhz Link Rate and 600 MHz Pixel Rate..
•4 Ports of LVDS Transmitter capable of transmitting data at 165 M pixels/second each port
•Display Port specification 1.2 compliant
•Programmable 2-Port or 4-Port LVDS outputs
•Programmable LVDS Data Sequence in Sequential mode or Left-Right mode
•Programmable LVDS Port Swapping for easy PCB layout
•Programmable LVDS Data Width in 6-bit, 8-bit or 10-bit
•Programmable LVDS Data Mapping
•Low power consumption in Power Down mode
•128-pin LQFP