LVDS/ cLVDS > Transmitter

Part Number:EP103T


The EP103T LVDS transmitter supports transmission between the host and the flat panel display up to
SXGA+ resolutions. The transmitter converts 25 bits (8-bits/color, 2 dummy bits) of Low Voltage TTL
data and 3 control bits into 4 LVDS (Low Voltage Differential Signal) data streams. At a maximum input
clock rate of 135MHz, each LVDS differential data pair speed is 945Mbps, providing a total throughput
of 3.78Gbps. The transmitter can be configured to input clock rising edge or falling edge strobe through
an external pin.


The EP103T includes the following distinctive features:
•Support 10MHz to 135MHz clock rates for HVGA to SXGA+ resolution
•Up to 3.78Gbps bandwidth
•PLL requires no external components
•Cycle-to-cycle jitter rejection
•3.3V to 1.8V Low Voltage TTL tolerant Input
•Programmable data and control strobe select
•Power down mode supported
•TSSOP package (8.1mm x 14mm)