EP94Z3 is an HDMI 1.4 Repeater with Audio, VGA and Scaled LVDS outputs. The chip supports 1 HDMI/MHL RX port and 1 HDMI TX port with repeater function. The chip also supports decoded Audio, VGA and scaled LVDS outputs.
With the Scaled LVDS output, the chip provides a converted video output which can be in a different resolution from that of the HDMI input. The on-chip Scaler is able to scale the input video up or down to any resolution within the range of 0.5X to 2X in both Horizontal and Vertical direction. This is adequate for converting an EIA standard video to fit an LCD panel in different resolution.
The chip is compliant with HDMI 1.4 and supports SD/HD Audio and HD/3D Video up to 1080p. The chip also supports on-chip HDCP RX/TX engines and EDID RAM.
•On-chip HDMI/MHL Receiver which is compliant with HDMI 1.4b and MHL 1.1 specification
•On-chip HDMI Transmitter core which is compliant with HDMI 1.4b specification
•On-chip HDCP RX/TX Engine which is compliant with HDCP 1.4 specification
•On-chip Video Up/Down Scaler
•On-chip LVDS Transmitter supporting up to 150 Mhz pixel rate
•On-chip DAC supporting up to 150 Mhz pixel rate for VGA output port
•On-chip EDID RAM
•On-chip Audio Decoder which support 8-channel IIS, S/PDIF and DSD audio outputs
•Support HDMI Repeater function
•Support YCC422 to YCC444 conversion
•Support YCC to RGB conversion in ITU-R BT.601 and 709 color space
•Support Separate Sync and/or SOG (Sync On Green) on VGA output
•Support LPCM, Compressed Surround Audio, HD (HBR) Audio and DSD audio
•Support audio soft mute
•Support SPDIF Channel Status extraction
•Register-programmable via slave IIC interface
•Low stand-by current (< 1mA) at power down mode
•80-pin LQFP package